In aggressive industrial applications,equipment where high impact , high abrasion inevitably suffer mechanical attack, chemical attack, corrosion, or by a combination of these three modes.
Ultraming Ceramics can offer various of ceramic liner plate for customer’s abrading environment. Composite ceramic wear liner is intended for the toughest applications with very high materials. when a combination of extreme wear and impact resistance ans long wear life is needed , ultraming offer composite ceramic wear liner with large and hard ceramic bricks vulcanized into a matrix of wear resistant rubber .due to its elastic properties the rubber acts as a dampener. It makes it possible to use this product in applications with a lot of impact without the risk of crushing the ceramic bricks .
Product features:
> High hardness
> Superior abrasion and impact resistance
> Corrosion and chemical resistance
> Light weight
> Easy installation by epoxy resin or bolt
> Improve your working environment-noise, vibration and safety
Category | 92 Series | 95 Series | T 95 Series | 99 Series | ZTA | ZrO2 |
Al2O3 | ≥92% | ≥95% | ≥ 95% | ≥ 99% | ≥75% | / |
Fe2O3 | ≤0.25 | ≤0.15 | ≤0.15 | ≤0.1 | / | |
ZrO2+Ye2O3 | / | / | / | / | ≥23% | ≥99.8% |
Density | ＞3.60g/cm3 | ＞3.65g/cm3 | ＞3.70g/cm3 | ＞3.80g/cm3 | ＞4.10g/cm3 | ＞5.90g/cm3 |
HV Hardness N/mm2(MPa) | 980 | 1040 | 1100 | 1250 | 1360 | 1100 |
Bending Strength MPa | 260 | 280 | 320 | 350 | 400 | 1000 |
Compression strength MPa | 1150 | 1200 | 1250 | 1300 | 1400 | / |
Fracture Toughness MPam 1/2 | 3.68 | 3.72 | 3.94 | 4.5 | 5.5 | 7 |
Abrasion | ≤0.47cm3 | ≤0.42cm3 | ≤0.28cm3 | ≤0.10cm3 | ≤0.10cm3 | ≤0.10cm3 |
