ZTA ceramic wear liner
Based on the practical testing on
some giant mines in Australia.ZTA liner is proved to be nearly 2.5 times higher than Alumina liners. Such excellent anti-wear ability makes ZTA the ideal material to protect the equipment wherever suffering the extreme wear&impact particularly in mining ,power plants, cement plants, steel mill , ports.By using the ZTA, equipment life time is largely extended and the costly downtime for maintenance is avoid.
Item | ZTA |
Ceramic wear material | 70%~75% Alumina |
25%~30% Zirconia | |
Density | 4.2 g/cm3 |
Porosity | < 0.1 |
Compressive Strength | ≥ 1400 Mpa |
RockwellHardness | ≥ 90 HRA |
Vickers Hardness | ≥ 1200 HV10 |
Fracture Toughness (KIC) | ≥ 5.5 Mpa.m1/2 |
Bending Strength | ≥ 350 Mpa |
Wear Volume | ≤ 0.009 cm3 |
ASTM G65 Relative Factor | 11-14 |
Rubber | Natural |
Tensile Strength (TSB) | ≥ 15 Mpa |
Hardness | 60 +/- 5 ShoreA |
Elongation | 450% |
Resilience | 0.65 |
Application
Ceramic complex pipeline of glass fiber reinforced plastics,
Alumina ceramic liner for cement cyclone,
Metal complex pipeline and elbow,
Abrasive liner for down spouting,
Abrasive liner for pipeline,
Preheater bracket,
Abrasive wheel of powder.